La Deau Manufacturing Co. - Item # MS-35823-8
Call Toll Free: 800.693.3990 | Info@LaDeau.com
LeDeau Manufacturing Company
Home  |  About LaDeau  |  Suppliers |  Contact Us
Search Catalog :
GO
Use trailing wildcard (*)
for broader results.

PRODUCTS  
Grey-Glo-Bullet Military Spec Hinges
MS20257 Series Hinges
MS358 Series Hinges
MS20001 Series Hinges
Grey-Glo-Bullet Military Spec Hinge Pins
Hinge Pin Data
Grey-Glo-Bullet Commercial Hinges
Aluminum Hinges
Steel Hinges
Stainless Steel Hinges
Brass Hinges
Grey-Glo-Bullet Custom Hinges
Spring Loaded Hinges
Solid Barrel Hinges
Heavy Duty Hinges
Custom Leaf Hinges
Hardware Attached Hinges
Multiple Pin Hinges
Contoured Hinges
Take Apart Hinges
 
   
 ANSI Logo
All Categories > Commercial Hinges > Steel Hinges > MS358 Series Hinges > Item # MS-35823-8  
Request Information

Item # MS-35823-8



    Print Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  



com-Bucket-Commercial

larger image

MS20258

larger image



Specifications · Notes

Specifications

Gauge

0.050

Knuckle Length

0.623 in

Pin Diameter

0.125 in

Stock Length

72 in

Open Width

2.500 in

Notes
  1. Material:
    A. Aluminum - Leaf - Temper, H24 or H34 half hard, per QQ-A-250/8. Aluminum - Pin - Temper, half hard, per QQ-A-225/7.
    B. Brass - Leaf - Alloy 268, temper half hard, per QQ-B-613. Copper-Pin-Alloy 260, temper half hard per QQ-W-321.
    C. Corrosion Resisting Steel - Leaf - Class 301, 302 or 304, Condition A, temper annealed, per QQ-S-766. Corrosion Resisting Steel - Pin - Form 1, Condition B, per QQ-W-423.
    D. Carbon Steel - Leaf - Cold-rolled, temper No. 4, per QQ-S-698. Carbon Steel - Pin - Composition 1010, 1020 per QQ-W-461.
    E. Carbon Steel - Leaf - Cold-rolled, temper No, 4, per QQ-S-698. Copper-Pin-Alloy 260, temper half hard, per QQ-W-321
  2. Finish:
    Materials A, B, C, and D shall be plain (uncoated). Materials D when specified, shall be zinc plated type II, Class 2 of QQ-Z-325 or Cadmium plated type II, Class 1 of QQ P-416. Materials E shall be cadmium plated type II, Class 1 of QQ-p-416.
  3. Dimensions:
    All dimensions are in inches unless otherwise specified.
  4. Part Number:
    The MS part number consists of the MS number plus the dash number followed by the applicable letter for material. When protective finish is required for materials "D", add F to the dash number. Example: MS35825-12DF.
  5. End knuckles shall be a minimum 1/2 of knuckle.
  6. Cumulative tolerance on pitch is K015 in any 36 inch segment.
  7. Hinges shall be stocked and issued in lengths of 72.00 & 84.00 inches. Application may be of any length within the length.
  8. For design feature purposes, this standard takes precedence over procurement documents referenced herein.
  9. Reference documents shall be of the issue in effect on date of invitations for bid.

Request Information
LaDeau Manufacturing Company, 637 W. Colorado Street, Glendale, CA 91204-1103  |  Toll Free: 800.693.3990  |  Tel: 818.240.3990  |  Fax: 818.240.1219  |  Info@LaDeau.com  |  Privacy Policy  |  Site Map